TEXAS · WATER DAMAGE · UPDATED OCTOBER 2026
Texas water damage pros, picked for you in one call.
Tell us the problem and your city. We recommend one licensed Texas water damage pro who does that job and connect you on the same call.
Free · No forms · Open 24/7
What's going on?
Tap the closest match. We'll connect you with the right local plumber.
How do you find a reliable water damage pro in Texas?
Hire a contractor with TDLR mold certification for any project over 25 contiguous square feet and general liability insurance. Texas has received 71 federal disaster declarations for flooding, hurricanes, and severe storms. Confirm the pro carries equipment for Category 2 and Category 3 water, pulls local permits when required, and has experience with your specific damage type, whether hurricane, freeze, or flash flood.
Plumbing services in Texas
- 01
Emergency leaks & burst pipes
Fast response for active leaks, burst pipes and shutoff help.
- 02
Drains & sewer
Clogged drains, sewer backups, hydro-jetting and camera inspections.
- 03
Water heaters
Repair, replacement and heat pump water heater installs.
- 04
Repipes & remodels
Whole-home repipes in copper and PEX, plus remodel rough-in.
- 05
Fixtures & gas
Faucets, toilets, gas line work and permit-required installs.
- 06
Diagnostics & camera inspection
Sewer camera, leak detection and acoustic locating before any repair.
By the numbers
- 71Federal disaster declarations for flooding and storms in Texas.Fludzone
- 93%Texas residential properties with no flood insurance coverage.MYKXLG
- 25 sqftMold remediation threshold requiring TDLR license in Texas.El Paso Water Removal
- $195BDamage from Winter Storm Uri in February 2021, costliest Texas disaster.Environment America
Need a water damage pro in Texas? One call. One licensed local.
Homeowners: we match you to a vetted local water damage contractor, free.
Homeowner guide · Updated October 20, 2026
Texas homeowner guide
Texas water damage looks different than other states. Hurricanes hit the Gulf Coast, flash floods strike Central Texas in minutes, and winter freezes burst pipes statewide. Nearly one-third of residents reported water damage after Winter Storm Uri in 2021. Standard homeowners policies exclude flood damage regardless of cause. Here is what matters when you call for help.
Why Texas mold law drives the licensing question
Texas has no statewide general contractor license for water damage restoration, but Texas Occupations Code Chapter 1958 requires a TDLR-licensed mold remediation contractor for any project over 25 contiguous square feet. Category 1 clean water can escalate to Category 2 gray water within 24 to 48 hours as contaminants are absorbed from drywall, carpet, and soil. A licensed pro will assess the water category on arrival, document the affected area, and pull the TDLR license if mold work crosses the 25-square-foot threshold. Homeowners, call now and we will match you to a licensed local pro who carries the right certification for your job.
Hurricane and coastal storm damage in Gulf Coast cities
Hurricane Harvey in 2017 dropped more than 50 inches of rain in parts of Southeast Texas and caused at least $51.177 billion in damage. Hurricanes and tropical storms remain the primary flood driver along the Gulf Coast. A good water damage contractor in Houston, Galveston, or Corpus Christi will carry truck-mount extractors, air movers, and dehumidifiers sized for Category 3 black water, coordinate with your flood insurance adjuster if you carry NFIP or private coverage, and handle the mold remediation that almost always follows saltwater intrusion.
Flash Flood Alley and Central Texas risk
Central Texas, specifically the Hill Country region, is called Flash Flood Alley due to heightened risk for flash flooding. The July 2025 Central Texas floods caused $1.1 billion in damage. Extreme rainfall in short timeframes overwhelms urban drainage infrastructure, and water rises in minutes. A licensed pro in Austin, San Antonio, or Waco will extract standing water within hours, set up containment barriers to stop migration, and document the timeline for your insurance claim. If you own the home, call for same-day help before Category 1 water escalates to Category 2.
Winter freeze pipe bursts and Uri lessons
Winter Storm Uri in February 2021 was the costliest natural disaster in Texas history, causing over $195 billion in damages. Nearly one-third of Texas residents reported water damage in their home following the freeze. Burst pipes in attics, exterior walls, and slab foundations flooded homes across Dallas, Fort Worth, Plano, and Frisco. A licensed water damage pro will locate the source, coordinate with a Texas plumber to repair the line, extract water from walls and ceilings, and set up drying equipment before mold takes hold. Expect $2,000 to $8,000 for extraction, drying, and initial mold prevention on a typical single-story home.
Flood insurance gaps and what your policy covers
Standard Texas homeowners policies explicitly exclude flood damage, regardless of the cause. Approximately 93% of Texas residential properties have no flood insurance coverage. The standard NFIP residential limits are $250,000 for the building and $100,000 for belongings, bought as two separate coverages with two separate deductibles. Private flood carriers can provide dwelling coverage that exceeds the NFIP maximum and contents coverage beyond $100,000. On many low-risk and moderate-risk Texas homes, private carriers beat the NFIP on price while offering higher limits. A licensed restoration contractor will document the damage, photograph every affected room, and provide a detailed estimate your adjuster can review. Prices checked October 2026.
What to ask before you hire
Ask for proof of general liability insurance and the TDLR mold license number if the affected area exceeds 25 square feet. Confirm the contractor carries moisture meters, thermal imaging cameras, and commercial-grade dehumidifiers. Ask how fast they can arrive, whether they work with your insurance carrier, and whether they pull local permits when required. A good Texas water damage pro will answer every question, walk the property with you, and explain the drying timeline before starting work. Nationwide, licensed water damage pros follow the same homeowner-first approach, but Texas-specific experience with hurricanes, freezes, and flash floods matters when the call comes in.
Cities we cover in Texas
Frequently asked questions
-
Do water damage contractors in Texas need a license?
Texas has no statewide general contractor license for water damage restoration, but Texas Occupations Code Chapter 1958 requires a TDLR-licensed mold remediation contractor for any project over 25 contiguous square feet. Ask for the TDLR license number and verify it on the Texas Department of Licensing and Regulation site if mold work is part of the scope. -
Does it cost anything to call?
No. The call is free. We are paid by the restoration company, not by you. We match you to one licensed Texas water damage pro on the same call. -
How fast can a pro reach me in Texas?
Most licensed water damage contractors in major Texas cities arrive within 60 to 90 minutes of your call. Rural areas may take longer depending on distance. We route your call to a pro who can reach you the same day. -
Does homeowners insurance cover water damage in Texas?
Standard Texas homeowners policies explicitly exclude flood damage, regardless of the cause. Sudden and accidental water damage from a burst pipe or roof leak is often covered, but you need separate flood insurance for rising water. Approximately 93% of Texas residential properties have no flood insurance coverage. Confirm your coverage with your carrier before the restoration starts. -
What is the difference between Category 1, Category 2, and Category 3 water?
Category 1 is clean water from a supply line or rain. Category 2 is gray water with contaminants from washing machines, dishwashers, or toilet overflow without feces. Category 3 is black water from sewage, flooding, or standing water with bacteria. Category 1 can escalate to Category 2 within 24 to 48 hours without treatment. A licensed pro will assess the category on arrival and adjust the drying plan. -
How much does water damage restoration cost in Texas?
Extraction, drying, and initial mold prevention on a typical single-story Texas home runs $2,000 to $8,000. Larger homes, Category 3 black water, or structural repairs push the cost higher. Hurricane and flood damage with saltwater intrusion often exceeds $10,000. Ask for a written estimate before work starts. Prices checked October 2026. -
What if I have mold after water damage?
Any mold remediation project over 25 contiguous square feet requires a TDLR-licensed mold remediation contractor in Texas. A licensed water damage pro will assess the affected area, document the scope, and either handle the mold work under their TDLR license or refer you to a Texas mold specialist. Mold grows within 24 to 48 hours of water exposure, so speed matters.
Need a Texas water damage now?
One call. One licensed local pro. Free to you.